Detronic Mix Advance 2K-Unit
Versatile and flexible electronic mixing and dispensing system based on Siemens S7-1200 PLC; suitable for all application methods (air spraying, airless, air-assisted airless, manual or automatic coating, electrostatic.
Fields of application
Water- or solvent borne multicomponent systems (coatings, adhesives, release agents, etc.)
advantages
Advantages
- Simple, reasonable operation via colour touch screen, basic functions start, stop, rinse, reset also via illuminated pushbutton
- System settings password-protected
- Up to three components can be processed
- 1K operation possible (e.g. for colour change controls)
- Up to two mixing units can be operated mutually with one control system
- Customer-specific software adaptations possible at any time
- Modular mixing unit, can be expanded at any time
- Flow meters are individually adapted to the paint system
- Standard solutions for explosive areas available
- Automatic pot life monitoring via gun rinsing box (e.g. GunGuard Evo)
- Recipe-dependent flushing programs
Automatic Spray Guns
Reliable automatic spray guns for all application methods (air spraying, airless, air-assisted airless ) for use on automatic painting systems (e.g. flat spray machines). Fluid touching parts in contact with material made of stainless steel
Fields of application
Water- or solvent borne multicomponent systems (coatings, adhesives, release agents, etc.).
Advantages
- Developed and manufactured in Nuremberg
- Low-cost equipment for many applications
- Spare parts supply directly by the manufacturer
Variants
Automatic gun for air-assisted airless spraying. High application rates with quite good surface quality. Ideal e.g. for classic steel and mechanical engineering.
DELIFT LIFTING DEVICE
Inexpensive and reliable lid lifting devices in robust industrial quality. Developed and manufactured in Nuremberg, available for all common container sizes, individually configurable. Pneumatically driven.
Fields of application
Ideal for use in paint supply systems or as a stirring station for preparing liquid materials.
Advantages
- Robust construction, proven many times
- Explosion-proof, use in zone 1 possible
- Wide range of configuration possibilities
- Special designs from batch size 1
Variants
UVFIX BELLOWS PUMPS
Low-wear pump series for the highest demands in terms of service life, reliability and ease of maintenance. Developed and manufactured in Nuremberg.
Fields of application
Abrasive media, e.g. UV coatings, isocyanate hardeners, resins, adhesives, etc. Special applications. HVPA series specially designed for pulsation sensitive applications and high flow rates.
Advantages
- Easy to maintain due to the design
- Long service life due to special piston seal and piston made of aluminum oxide
- No material contact with air due to bellows seal
- Fast, inexpensive and reliable spare parts supply directly from the manufacturer
- Explosion-proof, use in zone 1 possible
Variants
GUNGUARD EVO GUN FLUSH BOX
Accessory for 2K systems. Enables automatic pot life monitoring and flushing or filling of manual spray guns. Adaptable to all gun types. Developed and manufactured in Nuremberg.
Fields of application
Increasing the degree of automation of an electronic 2K unit with manual application.
Advantages
- Suitable for all spray processes
- Can be used in explosive areas
- Adaptable to all gun types
- Robust construction, reliable function
- Designed specifically for the DETE Detronic Mix Advance, but compatible with many other 2K systems
- High operator comfort due to easy insertion and secure hold of the spray gun
TWIN DIAPHRAGM PUMP
Twin diaphragm pumps are very suitable for pumping shear-sensitive materials, for example. Due to their principle, they are also characterized by good flushing properties.
Fields of application
Water- and solvent-based coatings, shear-sensitive materials, low to medium viscosity fluids
Advantages
- Easy rinsing
- Low pulsation
- compact design
- stainless steel
- easy to maintain
Variants
The Twin20 Abrasive is a cost-effective diaphragm pump that can convey materials at pressures of up to 0.9 MPa. Its fluid section is made of wear-resistant, hard-coated aluminum, fitted with PTFE diaphragms.
The Twin33 VA is a is a 1:1 diaphragm pump capable of pumping materials at up to 0.8 MPa. its fluid section is made of stainless steel, fitted with PTFE diaphragms.
The Twin315 is a pressure boosted diaphragm pump capable of conveying materials at up to 2.1 MPa. Iits fluid section is made of stainless steel, equipped with PTFE diaphragms.
AGITATORS
Highly efficient pneumatic and electric agitators, optimally designed for the respective application. Suitable controls and safety technology for individual applications or complex paint supply systems.
Fields of application
Stirring, homogenizing and conditioning of various fluids from single components, suspensions or emulsions
Advantages
- Application-specific explosion protection up to zone 0
- Wide range of agitators available
- Parts in contact with material made of stainless steel
- Proven technology from German manufacturers
- Can be combined with the lid lifting devices of the DeLift series
- Available for all common container sizes
Variants
Innovative radial piston technology in various performance classes, extremely quiet and energy-saving, simple speed control, optimally applicable up to 300/min with high torque especially at low speeds.
Application-specific designed agitators with electric drive, with fixed speed, manual speed control or FU-controlled. Suitable agitator controls available.
SYSTEM COMPONENTS
Wide range of functional and proven accessories such as material pressure regulators, filters or innovative peripheral devices for preventive protection against pump defects.
Fields of application
Use in paint supply systems or standalone spray equipment.
Components
Low-pressure fluid regulator with a control pressure of up to 22bar (depending on model) and up to 12l/min flow rate, available as upstream or downstream regulator. Mechanically or pneumatically controlled.
High-pressure fluid regulator with a control pressure of up to 270bar (depending on model), available as upstream or downstream regulator.
Reliable, mechanical shut-off valve for pneumatic pumps. Switches off the compressed air supply in the event of a sudden increase in air consumption (e.g. when a container runs dry) and thus reliably protects the connected device from dry-running damage. Also suitable for pumps with low air consumption.
Mechanical valve which, in the event of a sudden increase in pressure (e.g. opening of a ball valve), pressurizes a downstream device with a controlled increase in pressure. Effective protection for sensitive diaphragm pumps.
Dead space optimized and fast operating 3-way valve. Ideal for frequent material changes or application-specific fluid switching. Pneumatically opening, spring return closed.
FLOW HEATER VULKAN35
Electrically operated flow heater for painting applications. Available as 1- or 3-phase version, 230V-400V. 3,5KW power, maximum material temperature 85°C.
Fields of application
All kinds of fluids like water or solvent based paints, adhesives etc., up to 350bar material pressure.
Advantages
- Explosion proof design
- Reduction of the solvent requirement for dilution by lowering the viscosity by heat
- Increase in coat thickness application in a single operation
- Improvement of the surface structure especially on vertical surfaces
- Improvement of coating quality due to constant material temperature